14 résultats affichés
Confloor 5300 is three component, self-leveling, VOC compliant urethane, non-slip flooring system applied as a wet slurry mortar that is spread and then allowed to level to provide a smooth flooring surface. It is resistant to extreme hot and cold changes in temperature and does not support bacterial growth. It is suitable for flooring in breweries and wineries, pharmaceutical Plants, commercial Kitchens and Restaurants, processing Areas and loading bays etc.
Conseal 100 is a solvent free elastomeric coating designed for sealing and waterproofing of roofs, walls and other wet areas. The surface is a hard wearing, durable protective and waterproof coating. The coang also is designed for the protection of concrete structures against carbonation, chloride water ingress.
Conseal 220 is water based, polyurethane hybrid waterproofing membrane that cures to a permanently flexible seamless membrane with good adhesion to a wide range of substrates. Unlike more traditional bitumen based products, Conseal 220 does not brittle with age, exposure to ultra violet radiation or weathering, and hence it does not crack or craze due to its’ flexible properties.
CONSEAL 250 is a revolutionary single component permanently elastic Polyurethane waterproofing membrane which after polymerization forms an elastomeric polyurethane membrane, resisting UV rays and capable of handling building movements.
Once cured CONSEAL 250 allows for expansion and contraction over a broad temperature range and maintains waterproofing properties under continuous exposure to water. It may be applied easily on different surfaces (concrete, mortar, brick, ceramics, bituminous membranes, steel, zinc, Aluminum).
Conseal 270 is two components, solvent free, liquid applied Polyurethane based waterproofing coating which when mixed together, forms a high performance seamless elastomeric waterproofing. It increases the wear and abrasion resistance of treated surfaces.
CONSEAL 300 is a pure bitumen emulsion, with excellent elastic property used for long-lasting waterproofing. It is a single component liquid which dries to form a black flexible coating.
Costar 1K is a blend of Portland cement, well graded quartz sand and polymer enhanced chemical ingredients which when mixed with water, forms a waterproof coating for concrete surfaces. It can be used above or below the grade.
Costar 2B is two-component bitumen-based elastic and quick dry membrane which adheres firmly to the applied surface and forms an elastic waterproof layer.
Costar 2k is a two-component waterproofing membrane with tough-elastic properties suitable for both positive and negative side waterproofing of interior and exterior concrete and masonry surfaces.
Costar 2k Flex is a flexible two-component waterproofing membrane with tough-elastic properties suitable for both positive and negative side waterproofing of interior and exterior concrete and masonry surfaces.
Costar PolyCoat is formulated to be mixed with cement on-site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane. It provides an effective and economical method of waterproofing to concrete and masonry surfaces, by mixing with cement and application by brush.
Costar Pro Shield 100 is a polymer modified bituminous waterproofing membrane, manufactured from a mixture of bitumen and selected polymers, blended together to obtain good waterproofing properties. The bitumen compound also exhibits high heat and UV resistance properties.
Costar Pro Shield IV is a self-adhesive polymer modified bituminous, waterproofing sheet membrane, laminated onto a tough HDPE film on one side and a silicone release film on the other.
Krystal Coat is one-component crystalline waterproofing slurry that is specially designed to permanently waterproof both old and new concrete. It lowers the permeability of concrete and is used in place of surface applied waterproofing membranes for improved durability and longevity of concrete.
