Affichage de 1–16 sur 17 résultats
Aqualatex C10 is a high quality viscous acrylic emulsion bonding agent used for concrete repairs, especially areas where good adhesion are required. When mixed with a cement/sand or gravel combination, Aqualatex C10 becomes an effective patching and topping mortar. It is also designed for use as a polymer modifier in mortars and concretes to increased tensile, flexural and bond strengths, magnitude resistance to water and hydrolysis.
Costar Crack Master is a composed of cement, special aggregates, polymer and addives specifically designed for filling the cracks in plastered surfaces. It has excellent bonding, ease of applicaon, water resistance, aesthec appearance & durability.
COSTAR EPOXY CONCRETE REPAIR MORTAR is a solvent-free repair mortar with low viscosity. It is a two-component solution, which consists of rapid curing resin based mortar and primer for coating. And appropriate for different ranges of civil works where highly penetrating material is required. It is non-sag property makes it suitable for vertical repairs. Suitable for the repair and filling of cracks up to 6mm wide in a construction works, varying from concrete, bricks, stucco, stone, concrete blocks, tile and other substrates, likewise, provides long-lasting repair for worn-out concrete. For aesthetic finishes, it can be painted or coated to achieve the desired appearance after tack free (approximately 3 hours).
Krystal Plug is 1-component, cementitious non-shrink, hydraulic cement-based on crystalline waterproofing technology. It withstands strong hydrostatic pressure, is breathable, has no odour, no fume & is nonflammable. Krystal Plug ensures permanent impermeability of concrete and is used in place of surface applied waterproofing membranes for improved durability and longevity of concrete.
Costar Repair Mortar 30 is a one-component, smooth finish easy to use cementitious patching mortar ideal for the repair or re-profiling of concrete. Costar Repair Mortar 30 is provided as a pre-mixed, polymer changed, dry powder which when blended with water is intended for application between 3-20mm.
Costar RM 10 is a single-component cementitious repair mortar. The highstrength patching material is suitable for both interior and exterior concrete surfaces, and for general repair of cracks and holes. It can be applied to rigid surfaces – sand/cement/ screed or concrete bases, asphalt, granolithic, terrazzo, ceramic and quarry tiles, epoxy and polyurethane coatings.
Costar RM 20 is a one-component, polymer-modified, easy to use cementitious patching mortar ideal for the repair or re-profiling of concrete. Costar RM 20 is provided as a pre-mixed, polymer charged, dry powder which when blended with water is intended for application between 10mm to 100mm. Repairs more noteworthy than 20mm can be accomplished by building out the repair concrete with perfect, dry total. It is manufactured for repair on concrete highways, bridge decks, concrete parking lots and concrete floors.
Costar RM 20 F is a one-component, polymer-modified, easy to use and rapid drying cementitious patching mortar ideal for the repair or re-profiling of concrete. Costar RM 20 F is provided as a pre-mixed, polymer charged, dry powder which when blended with water is intended for application between 10mm to 100mm. Repairs more noteworthy than 20mm can be accomplished by building out the repair concrete with perfect, dry total. It is manufactured for repair on concrete highways, bridge decks, concrete parking lots and concrete floors.
Costar RM 40 is heavy duty; polymer modified structural patching concrete with high ultimate compressive strength and abrasion resistance. It is specially designed for use on vertical and horizontal concrete repair and reinstatement in large or small areas.
Costar RM 50 is heavy duty; polymer modified fast setting structural patching concrete with high ultimate compressive strength and abrasion resistance. It is specially designed for use on vertical and horizontal concrete repair and reinstatement in large or small areas.
Costar Superbond 10 is waterproofer and bonding addive for use with Portland cement and sand to form high strength mortars for the fixing of ceramic, wall, floor, marble, natural or arficial stone etc.
COSTAR SUPERBOND 15 is Polyvinyl based acrylic bonding agent that is designed as an integral adhesive for cement, bond coats, mortar and concrete to enhance compressive strength, bond strength, chemical resistance and waterproofing properties.
COSTAR SUPERBOND 15 has an excellent stability against cement and provides excellent adhesion to various substrates such as concrete, masonry, brick, wood, metals, and others. Cement modified with COSTAR SUPERBOND 15 shows superior flexural and impact strength, as well as excellent abrasion resistance compared to unmodified cement. Cement mortars prepared with COSTAR SUPERBOND 15 have improved resistance to many industrial chemicals and improved resistance to water, ultraviolet light and heat.
Costar Superbond 20 is a two-component epoxy bonding material ready for on-site mixing and use. The product is ideal for roads, bridges, pavements, loading bays and factories, and for bonded or granolithic floor toppings. It is equally suited to internal and external applications. Costar Superbond 20 conforms to ASTM C881: Type II, grade 2, class C.
Costar Superbond 5 is polyvinyl alcohol stabilized, externally plasticized, vinyl acetate homopolymer. It contains no harmful phthalates. It is suitable for use as general-purpose economic adhesive, sealer and mortar improver.
Costar UW Mortar is a ready to use, quick setting cement-based underwater mortar. The powder, when mixed with water, produces a mortar which is wash-out resistant and waterproof. It was explicitly designed for underwater repair works.
COSTAR ZINC PRIMER 10 is one-component, cementitious, anti-corrosion coating for protection of steel reinforcement and as a bonding agent for concrete surfaces. It is formulated for use with Costar repair products.
